Heat Resis Conveyor Belt

Wire rope conveyor belt at the point of delivery, mainly in chute, guide trough and so on. It may be that the belt conveyor is seriously overloaded and the rubber skirt of the backfilling trough is damaged. The conveying quantity of the material should be controlled. The deviation of the conveyor belt with high inclination waveform causes the height of the two edges of the conveyor belt to change during operation, and the material is sprayed from the lower side. Correct deviation. In order to operate conveniently, the adjusting idler is installed in front of the polygonal idler and its panel. The adjusting idler can rotate around its vertical axis. The operator can adjust the idler by rotating the adjusting handle according to the need. When the conveyor belt with high inclination waveform is adjusted to the appropriate position, the adjusting idler can be tightened and pressed. When the tightening nut is fixed in its position, the adjusting idler can continuously exert torque on the pipe conveyor belt to achieve the purpose of adjustment. This method is only suitable for short distance tubular conveyors. When starting, if the radius of the concave section is small and there is no material on the conveyor belt, the conveyor belt will spring up and sprinkle material in the concave section. A belt pulley is added at the concave part of the belt conveyor to prevent the conveyor belt from bouncing.



The wire rope conveyer belt strengthens the operation management, controls the quantity of material and prohibits overload operation. Normal use of slip protection device, slip through the sensor signal, automatic shutdown, easy to maintain and handle. The large dip angle corrugated side conveyor belt strengthens operation management, controls material quantity and prohibits overload operation. Normal use of slip protection device, slip through the sensor signal, automatic shutdown, easy to maintain and handle. Large inclined wave belt conveyor belt regularly or timely adjust the tape tension. It is equipped with the corresponding tension device, which can be solved by adding counterweight when skidding, and has the function of automatically increasing tension compensation when skidding in rainy and snowy weather, and also has the function of automatically stopping the machine when the belt is broken. Large inclined wave belt conveyor belt regularly or timely adjust the tape tension. It is equipped with the corresponding tension device, which can be solved by adding counterweight when skidding, and has the function of automatically increasing tension compensation when skidding in rainy and snowy weather, and also has the function of automatically stopping the machine when the belt is broken.



In order to operate conveniently, Gansu high inclination waveform conveyor belt is equipped with this adjusting roller in front of the polygonal roller and its panel. The adjusting roller can rotate around its vertical axis. The operator can adjust the roller by adjusting the handle according to the need. When the high inclination waveform conveyor belt is adjusted to the appropriate position, the adjusting roller can be screwed again. Tightening nut fixed its position, high angle waveform flange conveyor belt in the convex arc section, often occurs in the belt section direction of the middle arch phenomenon, will make the belt discount. After folding, the damage of the adhesive tape is aggravated when entering the change drum or the driving drum section. The reason is that on the cross section of the belt with large inclination waveform, the pulling force on the unit length between the middle and the outside of the belt is too different, which makes the belt slip to the middle and form an arch or a discount. At this point, the distance between the groove angle and the length of the transition interval should be reduced, making the slot angle of the tape slowly transition. For convex belt conveyor, the radius of curvature of convex section should be increased as far as possible and the groove angle of roller should be reduced when the conveying capacity is satisfied. Adjusting the idler can continuously twist the round pipe conveyor belt to achieve the purpose of adjustment. This method is only suitable for short distance tubular conveyors.